Delta
LA601 2 wire single phase: 18" leads, 0-650 volts
Weatherproof N-4
Case Dimensions:
2 1/4" Diameter
4 1/2" High
Case Dimensions:
2 1/4" Diameter
4 1/2" High
600 Series Specifications |
|
| Type of Design | Silicon Oxide VaristorTM |
| Maximum current | 100,000 amps |
| Maximum energy |
3,000 joules per pole |
| Maximum number of surges | Unlimited |
| Response time one milliamp test | 5 nanoseconds |
| Response time to clamp 10,000 amps | 10 nanoseconds |
| Response time to clamp 50,000 amps | 25 nanoseconds |
| Leak current at double the rated voltage | none |
| Leads | 36" #12 THHN |
| Case material | PVC |
| Locknut and Washer Furnished | |
Conduction Characteristics |
8 x 20 microsecond wave shape ANSI IEEE NEMA Standard |
||||||
| Discharge Current | 5000 A | 10000 A | 20000 A | 40000 A | 60000 A | 80000 A | 100000 A |
|
Clamping Voltage (Line to Neutral) |
450 V | 920 V | 1040 V | 1500 V | 2300 V | 4000 V | 5000 V |
| Unlimited Operations | One Operation | ||||||
LA601 - For 440-600 Volt Single
Phase 2 Wire Service
Rated voltage 240-480-600 Volt, two wire service. Used when one hot wire of a three-phase system is to be protected; one wire for a control circuit, or three arrestors for protecting three phases.
INSTALLATION:
Fasten arrestor in place. Use a Delta mounting bracket, part # MB, a pipe strap, or a knockout hole. Connect the black wire to the hot line at any convenient point load-side of an existing fuse or circuit breaker. Connect the white wire to an existing ground system and the grounded metal framework of the equipment to be protected or make a ground source per NEC Article 250.